Woodworking DVDs and more at Workshop Essentials!
|
New!Workshop Essentials 3The Ultimate Tablesaw Tenon Jig Price: 9.99 GBP
|
Check out the trailer on YouTube!Workshop Essentials 3 - The Ultimate Tablesaw Tenon Jig is an advanced system for cutting tenons on the tablesaw. The idea of cutting tenons vertically is not new, of course, but until now has been fraught with the dangers of using an unguarded blade. This the best tablesaw tenon jig in the world, even comparing it with manufactured cast iron ones. It is accurate, versatile and fast - the workpiece just slides between two predetermined positions, so your tenons will fit right first time every time. It's also micro-adjustable so that rails and stiles end up flush when you need them to, ensuring minimal cleaning up. The normally-challenging twin mortice-and-tenon joint is covered as well, and is just as straightforward with this system as a simple tenon. By adding an auxiliary face, spline joints for picture frames become a doddle, too, and of course, the whole unit is guarded, making it the safest jig of its kind. The DVD also includes FREE PDFs for the tenon jig, the crosscutting jig for cutting the shoulders, the SUVA-style guard and the auxiliary guard. It is an ideal present for the more advanced woodworker - not recommended for the inexperienced. Total running time approx 72 minutes. |
|
|
Special Offer!
|
| Buy Workshop Essentials 1,2 and 3 together and clean up with a gigantic 40% saving! US customers - please note that WE 1&2 are available in PAL format only, so they do not play on an NTSC-only DVD-player. However, they DO play properly on modern Home Theater systems, on PCs, Macs and laptops, even in the US! |
|
|
Workshop Essentials
Jigs and accessories Volume 1 Price: 19.95 GBP
|
| Workshop Essentials Vol 1 is packed with jigs and gadgets for the workshop. Jigs for marking and setting out, a superb system for handling sheet materials on your own, sawing and routing, a selection of excellent tenon jigs as well as lots of ideas and tricks along the way. Ideal present for all home woodies, whatever their skill level. The DVD also contains FREE drawings in PDF format for each of the jigs shown on the DVD. Total running time approx 90 minutes. |
|
|
Workshop Essentials
Jigs and accessories Volume 2 Price: 19.95 GBP
|
| Workshop Essentials Vol 2 is packed with more jigs and gadgets for the workshop. There is a slot-routing jig, an excellent lightweight, fold-down outfeed table for the tablesaw and what is possibly the best router mortising jig around. It's the perfect companion to Vol 1. Ideal present for all home woodies, whatever their skill level. The DVD also contains FREE drawings in PDF format for each of the jigs shown on the DVD. Total running time approx 81 minutes. |
|
|
Special Offer!Workshop EssentialsJigs and Accessories Volumes 1 and 2 Price: 25.00 GBP
|
| Buy Workshop Essentials 1 & 2 together and save a massive 38%! Ideal present for all home woodies, whatever their skill level. The DVDs also contains FREE drawings in PDF format for each of the jigs shown on the DVD. Total running times approx 90 and 81 minutes. |
|
|
Bristol Levers
M6, Female, Twin Pack Price: 6.50 GBP
|
| These high-quality Bristol Levers are ideal for jig making as they can be parked out of the way. The nut is solid one-piece machined steel and the teeth which engage with it are also steel, housed in a high-impact polymer handle. Available as Female so you can add a stud of any length you like if you want them Male. Don't forget to use a drop of thread-locking compound. M6 (with a 43mm radius swing) Pack of 2 |
|
|
|
Bristol Levers
M8, Female, Twin Pack Price: 8.90 GBP
|
| These high-quality Bristol Levers are ideal for jig making as they can be parked out of the way. The nut is solid one-piece machined steel and the teeth which engage with it are also steel, housed in a high-impact polymer handle. Available as Female so you can add a stud of any length you like if you want them Male. Don't forget to use a drop of thread-locking compound. M8 (with a 65mm radius swing) Pack of 2 |
|
|
Self-adhesive rule
Metric 3,5m Right-to-Left Price: 7.95 GBP
|
| These high-quality, metallic-faced self-adhesive rules can be used in a wide range of jigs. Available in Metric, 3.5m long, 12mm wide. Please ensure that you order the right one, either with Zero at the left-hand end, reading towards the right (L->R), or Zero at the right-hand end, reading towards the left. (R->L) |
|
|
Self-adhesive rule
Metric 3,5m Left-to-Right Price: 7.95 GBP
|
| These high-quality, metallic-faced self-adhesive rules can be used in a wide range of jigs. Available in Metric, 3.5m long, 12mm wide. Please ensure that you order the right one, either with Zero at the left-hand end, reading towards the right (L->R), or Zero at the right-hand end, reading towards the left. (R->L) |
|
|
Sliding Nuts
M6, Pack of 10 Price: 3.49 GBP
|
| These sliding nuts are intended for use in T-slots. They can be used in either of two orientations, in-line (straight) or diagonal, the latter affording more contact area and better release when sliding. Dimensions are approximate M6 - track size 13 x 4mm (in-line) or 22 x 4mm (diagonal) Pack of 10 |
|
|
|
Sliding Nuts
M8, Pack of 4 Price: 1.50 GBP
|
| These sliding nuts are intended for use in T-slots. They can be used in either of two orientations, in-line (straight) or diagonal, the latter affording more contact area and better release when sliding. Dimensions are approximate M8 - track size 13 x 6mm (in-line) or 22 x 6mm (diagonal) Pack of 4 |
|
|
Flange Nuts
M6, Pack of 10 Price: 3.99 GBP
|
| These flange nuts are intended for use in T-slots. With a length of M6 studding, they make a very effective and inexpensive flange bolt.
Flange 22mm x 14mm x 1mm. Turret 8mm high, 8mm dia, M6 internal. Pack of 10 |
|
|
Nylon Bolt
M6, Pack of 10 Price: 3.99 GBP
|
| These nylon bolts are very useful for making jigs where you need to adjust a fit and keep it low friction for easy sliding. I use them on the Ultimate Tablesaw Tenon Jig, for example. M6 x 20mm, hexagonal head.
Pack of 10 |
|